Additional information
Origin | Mainland China |
---|---|
Feature | Stocked |
Model Number | Commercial stove infrared anti - air burning controller |
Material | Plastic |
Plastic Type | Melamine |
Type | Kitchen Lighters |
Certification | CE / EU |
177.50 $
50 in stock
Origin | Mainland China |
---|---|
Feature | Stocked |
Model Number | Commercial stove infrared anti - air burning controller |
Material | Plastic |
Plastic Type | Melamine |
Type | Kitchen Lighters |
Certification | CE / EU |
Commercial stove infrared anti-air burning controller function description
The controller is a commercial stove controller without fan control the fan can be independently controlled, which can realize automatic high-energy ignition and anti-air burning, and meet the needs of automatic control and safety protection of modern kitchen stoves. Controller working process:
The controller turns on the power switch, starts ignition, opens the air valve, and after 12 seconds, the ignition stops and enters the combustion state. At this time, the infrared sensor head and the receiving head constitute a pot sensor to detect whether there is a pot on the furnace, such as infrared light is blocked. It means that there is a pot to keep the burning state, otherwise the gas valve is closed and the flame is extinguished to prevent air burning. After that, the pots were monitored at any time, and there were pots and no pots. Function Description 1. High-energy ignition, sparks like open flames.
2. Prevent empty burning waste, automatically turn off the oil off the pot, put the pot to automatically send oil to ignite.
3, 24V gas solenoid valve with emergency switch, can be opened for continued use in case of accident. Installation Notes
1. Determine the installation position of the control box according to the length of the lead wire. It is recommended to install it on the iron frame behind the front plate of the furnace to avoid the high temperature area as much as possible.
2. Install the gas solenoid valve horizontally and keep the solenoid valve away from the high temperature zone.
3. Ignition pin installation method: double-needle ignition two-pin furnace fires each other, installed near the air outlet.
4. Installation of infrared emission and reception. Controller related connection:
1. Connect the power cable to 220V AC power supply. Set the power switch to start or stop the work. Turn off the power when not in use.
2. The ignition wire is connected to the ignition pin for ignition. The ignition pin is recommended to be in the form of a double point, which is most beneficial for the stable operation of the controller. If the single-fired burner is used, it will increase the probability of the controller being disturbed, so we do not encourage it. Be sure to reliably ground one of the high voltage wires when the customer must use it.
3. A 24V gas solenoid valve is connected to the solenoid valve line to control the total oil circuit of the stove.
4. Two-core waterproof plug is connected to the infrared emitter.
5. Four-core waterproof plug is connected to the infrared receiver.
6. In view of the harsh working environment of commercial stoves, in order to ensure long-term reliable operation of the controller, it is strongly recommended to take the waterproof and anti-fouling work of each wire joint seriously. After the debugging, the exposed wires and joints are wound with a wrap and a plastic wrap. Insulating tape and the like are tightly wound.
Installation instructions for the transmitter and receiver:
1. First, on the left side of the front beam of the furnace surface, first open the Φ20mm hole from the edge of 6-10cm. After the middle hole of the base is aligned with the opened hole, open the hole of the fixed base and fix the base of the emitter with the rivet. Insert the emitter into the hole, adjust the direction and fix the emitter with screws.
2. Drill the base of the emitter with a rivet according to the shape of the emitter;
3. Fix the receiving head on the back plate. Different hobs have different fixed positions, generally installed as follows;
a. Avoid the high temperature area of the exhaust vent and the high temperature area on the back of the stove;
b. The optical path of the transmitting head and the receiving head passes through the center point of the furnace
c. The optical path connection between the transmitting head and the receiving head cannot be blocked by the height of the furnace, and the nearest distance is 1-2 cm higher than the furnace;
d. Place the pot on the pan holder and do not block the light path connection between the emitter and the receiving head; at this time, the light path connection should be 2~4CM in front of the pot.
4. Open the Φ20mm hole at the selected position on the back plate. After the middle hole of the base is aligned with the hole opened, open the hole of the fixed base, fix the base of the receiving head with the pull stud, insert the receiving head into the hole, and adjust it. Then fix the receiving head with screws.
5. If two sets of controllers are installed on the double-head hob, the left and right sides are symmetrically installed. The two receiving heads are in the middle and the two transmitting heads are on both sides. Commissioning instructions for the controller:
1. Commission the power after installing all components. Infrared radiation debugging:
A. The upper part of the aluminum infrared component has a small eye. The function is to emit a beam of infrared light that is invisible to the naked eye to the receiving head to detect whether there is a pot on the stove. When there is a pot, the light will be blocked and the receiving head will not be received, otherwise an infrared signal will be received. This infrared ray is modulated and will not be confused with other infrared rays in the environment. The receiving head will clearly filter out this effective signal to achieve a correct judgment on the existence of the pot.
B. The aluminum infrared component has a glass window at the side end, which is a receiving head, built-in infrared receiving component and status indicator. The light is always on, indicating that the correct infrared signal is received, indicating that the infrared light is not blocked, and the transmitting and receiving directions are basically Normal, within the valid range. On the contrary, the flashing of the light indicates that the infrared signal is not received, indicating that the infrared light is blocked or emitted by the cookware, and the receiving direction is not within the effective range.
C, adjust the transmitting head to make the transmitting head emit in the direction of the receiving head. At this time, the infrared emitting head is blocked, the receiving head red light flashes, indicating that the receiving head controller is ignited, the electromagnetic valve is opened, and the receiving head is red when removed. Always bright. Precautions:
1. In the state of power or ventilation, the operator or other personnel are strictly prohibited to use the head or other body parts close to the burner, or block the light path to avoid fire burns. When it is necessary to check for fire, the fan must be turned on;
2. Under the working condition, it is strictly forbidden to place other items in the light path, so as to prevent the light path from being out of control.
3. To better experience the performance of this product, periodically wipe the transmitter and receiver with a soft object such as a sponge.
4. Cover the receiver's transmitter with something when cleaning the stove to prevent hard objects from getting scratched or water.
5. For everyone's safety, always close the main valve when not using the stove! ! !
6, commercial stove igniter – lead wire connection description: two high-voltage ignition wire 800mm with double-needle ignition needle for relative ignition, or a high-voltage ignition wire 800mm with ignition needle, and another high-voltage ignition wire 800mm The furnace body, the distance between the ignition needle and the metal of the burner is 5-6mm, and the ignition is discharged for the burner to form an ignition circuit. Ignition high-voltage line connection: The company strongly recommends that the customer use the dual-purpose ignition for the ignition needle. This kind of ignition effect is better. If the double-needle can only be used with a single needle because of the burner, one of the high-voltage output leads 800mm Connect the ceramic ignition needle, another high-voltage output lead 800mm must be fixed on the burner with screws. The distance between the ignition needle and the metal of the burner is 5-6mm. The ignition is discharged against the burner to form an ignition circuit. Note that it is not on the stove, it is not attached to the hob. If it is connected to the hob, the ignition circuit is very long. Moreover, the hob and the burner are not necessarily connected, so the ignition is cut off. In the loop, the igniter only uses half the power. Maybe you can hardly understand the truth at the same time. Maybe you will say that I have been connected in this way. It is very good. You just have to try it. So the igniter output high voltage line produced by our company is double long line. Length 800mm,
Infrared anti-air burning controller installation precautions
1. The installer must have an electrician installation qualification.
2. The rated input voltage of this igniter is 220V 50HZ. A qualified leakage circuit breaker must be installed at the front end of the power supply. The metal casing of the cooker must be protected by a grounding wire. It is strictly forbidden to connect the metal casing with a neutral wire!
3. The control switch on the panel should use a bipolar power switch of not less than 5A/250V, and the igniter power cord is connected to the power switch.
4. The controller can be fixed or suspended in the lower space of the cooker, and should avoid high temperature radiation baking.
5. High-voltage line is connected to the ignition needle. It is recommended to use dual-ignition ignition mode. The discharge spacing of the ignition needle is 3-5mm. Try not to use the single-discharge method. If only one high-voltage line is connected to the ignition needle, the other high-voltage line must be reliably connected to the burner. On the metal body, it can not be easily connected to the metal casing of the cooker, which will bring many difficult problems!
6. The length of the high-voltage line is “sufficiently long and shortest”. It is better to separate the two lines by more than 3 cm, and maintain a certain degree of drooping arc to facilitate oil drop. The high-voltage line can not be extended continuously. The wiring is not allowed to be close to the iron frame and iron plate of the stove. Do not add all kinds of casings. It is absolutely necessary to avoid twisting the two high-voltage wires together to avoid high-frequency high-voltage leakage.
7. Regularly clean up debris and do not rinse with water.
1, working voltage: AC220V 2, working voltage range: AC175-245V 3, service life: ≥100,000 times 4, ignition intensity: high-pressure powerful ignition, can ignite flammable gas and vaporized alcohol-based biofuels, 5, the igniter is sealed with epoxy resin, waterproof and moisture-proof. 6, ignition time: 12 seconds, can also be adjusted according to customer needs. Second, the commercial stove igniter - DQ2 lead wire plug connection instructions 1. Two high-voltage ignition wires 800mm are connected to the double-pin ignition needle for relative ignition, or one high-voltage ignition wire 800mm is connected to the ignition needle, and the other high-voltage ignition wire 800mm is [...]
67.50 $ Add to cart1, product model: DQ3. 2, the main function: delay super ignition. 3, working voltage range: AC175V-245. 4, the service life: ≥ 100,000 times. 5, ignition intensity: super ignition, can ignite flammable gas and various alcohol-based biofuels. The igniter can also ignite alcohol-based fuel when the ignition needle is wet, so it is especially suitable for igniting alcohol-based fuel. 6, ignition high pressure: ≥ 15Kv. 7, delay to stop the ignition time: turn on the AC 220V power supply, automatically stop the ignition after 12 seconds of ignition, time delay ignition can be determined according to customer requirements 8, the whole [...]
73.75 $ Add to cartGas Infrared Burner Igniter: Widely used in the ignition of industrial equipment gas burners in the fields of pre-coating treatment, drying and solidification, food baking, agricultural product drying, glass manufacturing, indoor and outdoor heating, paper making, printing and dyeing, etc. Control System. Gas igniter features: gas igniter, programmatic integrated IC control; two relays, to ensure the automatic adjustment of the circuit, safety protection, weak control, conversion circuit, etc.; high-quality insulation potting plastic packaging, more enhanced Security. The output high voltage is 16KV. In normal use, the flameout can be automatically re-ignited. When the timeout is 20 seconds, the gas solenoid [...]
77.49 $ Add to cart1. Description of N series atomization controller This series of controllers are used in conjunction with methanol spray burners to complete ignition and firepower adjustment. The ones with extinguishing function can be used in steaming ladle furnaces and other places. System parameter setting method: Long press the setting key to enter the system parameter setting, turn the knob to select the desired menu, then press the setting key to display the value, turn the knob to adjust the value, and then long press the setting key until SAU is displayed, which means the save is successful. Note: If you don't [...]
80.53 $ Add to cartInfrared beam debugging: a. The receiving head with a glass window at the side end of the aluminum infrared component has a built-in infrared receiving element and a status indicator. The light is always on to indicate that the correct infrared signal is received, indicating that the infrared light is not blocked, and the direction of emission and reception is basic Normal, in the effective range. On the contrary, the flashing light indicates that no infrared signal is received, indicating that the infrared light is blocked or emitted by the pot, and the receiving direction is not within the effective [...]
83.75 $ Add to cartAlcohol base material without fan electrification controller function description The controller is a moisture-proof structure of the whole plastic shell, and has its own lead-out line, which is used for electric heating and alcohol-free gasification stove without fan, in addition to conventional heating, temperature measurement, temperature control, inside igniter ignition high-voltage output, electromagnetic pump In addition to the functions such as built-in, there is also a model with its own precision fire regulation, which can realize stepless precision adjustment and start/stop control of the oil pump flow. This function and gear position adjustment realizes no need to switch, fire with [...]
415.00 $ Add to cartFunction description of alcohol-based fuel vaporization controller for precise regulation of firepower The controller is used for electric heating and alcohol-free gasification stove without fan, in addition to the functions of conventional heating, temperature measurement, temperature control, ignition, electromagnetic pump speed regulation, etc., it can also expand external precision regulator to achieve precise adjustment of oil pump flow and Start-stop control, this function and gear position adjustment achieve the effect of no need to switch, fire with heart, start and stop freely. At the same time, it can also extend the external word reset rocker switch or the third gear [...]
415.00 $ Add to cartWater-cooled constant temperature electric vaporization controller description The controller adds water cooling thermostat function based on all the control functions and structural advantages of the GN-787E series electric vaporization controller. Combined with water-cooled electric vaporization burner, it can realize constant temperature vaporization, improve work stability and reliability, and is an upgraded product of electric vaporization. The controller is a plastic shell moisture-proof structure, with its own lead-out line, which is used for electric heating and alcohol-free gasification stove without fan. In addition to the functions of conventional heating, temperature measurement, temperature control, ignition output, electromagnetic pump gear output, etc. There [...]
440.00 $ Add to cartAlcohol based electric heating vaporization controller function description The controller is a moisture-proof structure of the whole plastic shell, and has its own lead-out line, which is used for electric heating and alcohol-free gasification stove without fan, in addition to conventional heating, temperature measurement, temperature control, inside igniter ignition high-voltage output, electromagnetic pump In addition to the functions such as built-in, there is also a model with its own precision fire regulation, which can realize stepless precision adjustment and start/stop control of the oil pump flow. This function and gear position adjustment realizes no need to switch, fire with heart, [...]
527.50 $ Add to cartFeatures: Brand New and Never used Parts. Made by Premium Quality Material. Extremely Durable Aftermarket Part. Easy to install and prefect replacement for original parts. Compatible with: PelPro, Pleasant Hearth PelPro PP130 PP130-B PP60 PP60-B PP70 PPC90 Cast Iron TSC90 Cast Iron Pleasant Hearth PH35PS PH50CABPS PH50PS Specifications: Watts: 300 Length: 4 7/8″ Total diameter: 3/8 diameter Anti-seize Threading Connectors: Male Spades Replace part number: SRV7000-660-AMP High Temperature Wire-Fiberglass insulation Fiberglass woven glass strands provides good insulation for use in high temperature process heating applications over stranded Grade A nickel wire. Heat Shrink used on solder joints to [...]
GN-787E quick-loading alcohol base material electric heating vaporization controller function description The controller is a moisture-proof structure of the whole plastic shell, and has its own lead-out line, which is used for electric heating and alcohol-free gasification stove without fan, in addition to the functions of conventional heating, temperature measurement, temperature control, ignition output, electromagnetic pump gear output and the like. There is also a model with its own precision fire regulation to choose, which can realize the stepless precision adjustment and start and stop control of the oil pump flow. This function and the gear position adjustment realize the [...]
377.50 $ Add to cartQuick-loading alcohol base oil and oil linkage frying stove controller function description The controller is a moisture-proof structure of the whole plastic case, and has its own lead-out line. It is used for electric heating and alcohol-free atomizing stove without fan. In addition to the functions of conventional fan, ignition output, electromagnetic pump gear output, etc., there are also 5 files. The key oil and oil linkage makes the matching of the air volume and the oil volume of each gear in the best, and the fast 5 gear and the rocker switch realize the effect of no need to [...]
196.25 $ Add to cartN series atomization controller description This series of controllers is used in conjunction with a methanol spray burner for ignition and fire regulation. With the extinguishing function, it can be used in places such as steaming furnaces. System parameter setting method: Press and hold the setting button to enter the system parameter setting, turn the knob to select the desired menu, press the setting button to display the value, turn the knob to adjust the value, and then press and hold the setting button until the SAU is displayed, indicating that the saving is successful. Note: If you do not [...]
177.50 $ Add to cartAlcohol base material without fan electrification controller function description The controller is a moisture-proof structure of the whole plastic shell, and has its own lead-out line, which is used for electric heating and alcohol-free gasification stove without fan, in addition to conventional heating, temperature measurement, temperature control, inside igniter ignition high-voltage output, electromagnetic pump In addition to the functions such as built-in, there is also a model with its own precision fire regulation, which can realize stepless precision adjustment and start/stop control of the oil pump flow. This function and gear position adjustment realizes no need to switch, fire with [...]
415.00 $ Add to cartNewly USB Rechargeable Electric Arc Lighter Windproof Flameless Flexible for Home Kitchen BBQ Description: Features: 1. Safety design:This arc lighter is designed with 10cm longest 360 degree flexible neck, it can bend to different angles to meet your different needs. Long flexible neck keeps a safe distance from your hand, 8 seconds automatically turn off feature ensures a safety use that prevents too high temperature damage. 2.LED Battery Display:The upgraded candle lighter can display real battery volume. A fully charge can be filled within 1-2 hours with 4 LED lights all turn on. This USB lighter can offer [...]
BBQ Gas Grill Replacement 3 Outlet AA Battery Push Button Ignitor Igniter Newbrand new and high qualityMaterial: Metal & PlasticColor: BlackColor: BlackFeature:1. Electric 3 Outlet Push Button Ignitor2.Suitable for BBQ Gas Grill Replacement3.Power supply: 1 x “AA” batterybattery is not includedbattery is not included4.Voltage: for DC 1.5V5.Size: 7.5 x 5 x 6.5cm Quantity:1 PCNote: Please allow 1-2cm error due make sure you do not mind before you bid.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you! BBQ Gas Grill Replacement 3 Outlet AA Battery Push Button Ignitor Igniter Newbrand new [...]
Quick-loading alcohol base material electric heating vaporization controller function description The controller is a moisture-proof structure of the whole plastic shell, and has its own lead-out line, which is used for electric heating and alcohol-free gasification stove without fan, in addition to the functions of conventional heating, temperature measurement, temperature control, ignition output, electromagnetic pump gear output and the like. There is also a model with its own precision fire regulation to choose, which can realize the stepless precision adjustment and start and stop control of the oil pump flow. This function and the gear position adjustment realize the effect [...]
458.75 $ Add to cartTitle .height { height: 800px; } .height-item{ height:400px; } .font-item{ font-size:16px; } @media screen and max-width:414px{ html,body { width: 100; } .height { height: 400px; } .height-item{ height:200px; } .font-item{ font-size:12px; } } $USD 0.94 $USD 0.01 $USD 0.36 $USD 0.01 $USD 0.97 $USD 8.33 Multi-function Electric Wire Stripper Pen Rotary Coaxial Wire Cable Pen Cutter Stripping Machine [...]
⭐ Price here is for 1 piece , ID 0.15mm 12 X 25 means the guide has an outer diameter of 12mm, length of 25mm, and inner diameter of 0.15mm. The guide surface/inlay is made of synthetic ruby. ⭐ Ceramic guide surface/inlay is also a popular choice, you can find 12x25 ceramic >> HERE ⭐We have tons of ready-made guides in stock, check them out! ⭐For All Guides and Chucks , please click >>HERE ⭐For Guides 8mm x 30mm , please click >>HERE and >>Here ⭐For Guides 12mm x 25mm [...]
51.50 $ Add to cartdescribe: Tool holder type: 6.35mm/1/4 inch Size: T6, T7, T8, T9, T10, T15, T20, T25, T30, T35,T40 Total length: 75mm/100mm feature: Brand new and high quality. Those magnetic drill bits that can be firmly fixed on a screwdriver are suitable for electric screwdrivers, manual screwdrivers, electric drills, air drills, etc. The magnetic drill bit is firmly fixed on the screwdriver. A set of 11 sizes, low price, can meet your requirements. The screwdriver bit is made of S2 alloy steel, which is a high-hardness material commonly used in hardware. Package Included: 1x T6 Torx screwdriver bit 1x T7 Torx screwdriver [...]
Features: Multifunctional Clamp Meter: it has functions of testing voltage, current, resistance, capacitance, frequency, diode, line on-off, live line voltage identify,Safety Level: it complies with the over-voltage standard of CAT II 600V, level II pollution, dual-insulation protection and over load protection throughout the range.Smart AC/DC Current Measurement: automatic and manual modes for the electric current measurement.Data Hold Function: convenient for observing or recording data.NCV Non-contact Voltage Detection: get the sensor near to the cable being detected, then the buzzer will alarm and NCV alarm light will flash when it detects AC voltage.Auto Power-off: if there is no operation in [...]
Description: Name: USB Fast Charge Tester Model: FNIRSI-FNB58 Size: 82 x 42 x 13mm Monitor voltage: 4~28V Monitor current: 0~7A Monitor power: 0~120W Load equivalent internal resistance: 0~9999.9Ω D /D- voltage: 0~3.3V Capacity: 0~9999.99Ah Energy used: 0~9999.99Wh Cable resistance: 0~9999.9Ω Equipmnt running time: 99d23h59min59s Record time: 99d23h59min59s Specifications: The FNB58 USB tester is a high-reliability, high-safety USB voltage andcurrent detection meter and a mobile communication terminal fast chargingtrigger. It has a 2.0-inch full-color ultra-wide viewing angle TFT LCD display, integrated USB-A, Micro-USB, Type-C interface. Use external 16-bit ADC, PD protocol physical chip. It can be used [...]
Product introduction: This products belong to the latest generation of BSIDE brand smart voltage detector tester multimeter! 2.2-inch red/green two-color display design, can leave an excellent user experience for buyers; The easy-to use/Single Button to Switch design is well recognized by buyers. Exquisite appearance / reliable performance / complete functions, can meet the needs of different groups of people, and is very suitable as gift. Main Features: Non-contact and pen shaped desigh,convenient to operate and carry. Dual sensitivity / Low:48~1000V). The sensitivity of the product can be adjusted freely according to the actual scene used. This product has [...]
Measuring range: accuracy: 0uW~10.0uW: ±5Laser wavelength measurement range: 400nm~1100nmThe default switchable value of laser wavelength: 520nm, 633nm, 650nm, 780nm customizable wavelengthLCD display 4-digit LCD displaySampling rate: 0.5 secondsData storage: 199 groupsBattery power indicator: 4-level power displayLCD backlight off time: press the backlight key to turn offAutomatic shutdown: automatic shutdown after about 5 minutes of inactivitySound alarm: √Date and time: √USB data transmission: √Maximum value measurement: MAX/MIN/AVGOperating temperature range: 0~40°COperating humidity range: 80RH temperature range: -10C~50°CPower supply: 9V 6F22 Does not includedLCD size: 57 x 37mmBody [...]
Features: x 1. Real-time Monitoring: The measuring socket supports the measurement of parameters such as voltage, current, accumulated electricity, accumulated electricity bills, and current. x 2. Only Two Function Buttons: Mode and UP. The function interface is concise and clear, easy to understand and adjust. There is a reset hole in the middle. If you need to reprogram, just insert a paper clip into this hole. x 3. High-resolution Digital Display with Backlight: The backlight can always be turned on or off after a delay of 20 seconds, so you can easily read in dark environments. [...]
Digital Wattmeter European Power Meter Current Voltage Voltmeter Ammeter Socket Tester Energy Meter EU Power Plug 25OFF Note -Dear friends, 'UK' plug is a British standard plug. If you are in Ukraine, you can choose EU Plug, thank you. -because if the product with battery, the customs will not pass, so the product not include the battery. If the plug specification is wrong or products are damaged, please contact us at any time when you are free, and we will reissue or refund it to you, thank you. Description: Power meter is a monitoring and testing instrument which determines [...]
Upgraded version of battery capacity tester Features: Suitable for carbon, zinc, alkaline and rechargeable batteries. Clear LCD bar graph display for your test. Tricolor mter indicating the battery's strength. Checks the power left in batteries Testing Range: C, AA, AAA, D, N, 9V6F22 batteries and 1.55V button cell Specification: Powered by: LR44 button type battery Batteries not included Material: ABS insulated plastic & stainless steel Dimensions: Color: Silver Quantity: 1 Pc Note: 1.Please allow 0-1cm error due to manual measurement. pls make sure you do not mind before you bid. 2.Due to the difference between different monitors, the picture [...]
Features: Brand New and High Quality Convenience, durable,Easy to use Standard 15mm pedal spanner which will fit the majority of bikes Specification: Material: Stainless steel,plastic dipped handle Size: Approx.20.6 x 4.7cm/8.11 x 1.85 1 X Bicycle Pedal Spanner Wrench relateproductdetail/ [...]
Automatic Wire Stripper General Cable Peeling Twisting Connector Electrician Stripping Artifact Connector household Hand Tools Description: 100 new and high quality 1.Automatic peeling thread and connect tools. 2.Good for electrical repair , quick peeling and wire winding. 3.It can effectively improve the work efficiency. 4.It is used for conbining cables or wires together. 5.Made of metal material, durable and easy to use. Specifications: Name: Automatic Wire Stripper Material: Steel Galvanized Features: High hardness, Wear resistance Scope of application: Electrician maintenance, Wire treatment Use: Electric / Manual Package Included: 1 [...]
Chcę coś kupić ale szukam informacji jak zamówić... |
Kupiłem coś ale chcę poznać status zamówienia... |
Odebrałem paczkę ale mam pytanie lub problem... |
Chcę dokonać zwrotu i potrzebuję informacji... |
Droptech Sp. z o.o. droptech.polska@gmail.com |
ul. Łódzka 118, Piotrków Tryb. Sprzedajemy tylko przez internet |
NIP: 7712911090 REGON 386758083 |
Wysyłka bezpośrednio od producenta lub dostawcy |
DARMOWA WYSYŁKA + ubezpiecznie dostawy + śledzenie przesyłki |
CAŁKOWITY ZWROT podczas reklamacji |
Reviews
There are no reviews yet.